Nastavak priče...


Citat Jocke kaže:

Now I can put the last part together nice and easy.



I do that at the same way as I do when I pull it off, just with my thumbs. No tools like pliers here, that will destroy the bezel insert.



Sometimes it dosen´t works and it´s a pain to get the last part in place. Then I use to put a cloth at the edge of the table and that will help you a lot. With that trick you can´t go wrong.



After that it´s ready for the watch and looks like this.



Then I put it over the spring nice and easy and look carefully so every part is in place.



Now it´s in place and as you can see it should be a little lower at the case so the crystal will be higher than the bezel.



Then I press down the bezel on both side at the same time until I hear a click. When you do that it´s in place. You can even see the crystal come out and the ratchet spring starts to work.



Now the only thing who is left is to see if it lines up.



It looks ok and if not, just do the same thing again.

Good luck and if you don´t feel safe to do the work, just let your watchmaker do it. I´m sure he do it for free.

I hope you have enjoy this trip and you can use the tips.

Jocke


Source: Jocke's Bezel Insert Tutorial