Još jedan tutorijal...

Citat Jocke kaže:
Rolex bezel tutorial

Here I will try to show how you pull off the bezel, the insert and then put it back together again.


I start with this things at the working bench. A cloth, a knife, masking tape,a pair of gloves and of course a Rolex watch.



Here I start with the masking tape, just make sure you get it between the bezel and the case.



Then I put in the knife between the bezel and the case.



And just bend a little until it pop off.



Then I pull off the bezel and be careful so you don´t lose the spring at the 12 o´clock position.



Here is the backside of the bezel and you can see how it works.



Then I press with my thumbs from the backside of the bezel insert until it pop off.



And after that so will it looks like this.



Then I put back the bezel at the case with the spring at the inside.



Then I lay the bezel insert inside the bezel and look so it line up. Then I press it down at the bezel and when it´s there at more than the halfway round I pull off the complete bezel again.