The Omega Seamaster 300 including Military watches
A Quick Guide: The Omega Seamaster 300 including Military models.
Case refs: 165.024 and 166.024 - 1962-1969.
I recently purchased the 'Italian' SM300 illustrated in Pic.19 and whilst carrying out some research on this watch came across an interesting posting on a French website - www.forum-mdp.com.
This 'Quick Guide' is based on my adaptation of that posting with extensive editing and rewriting plus changing and/or adding pics and is designed to assist the collector in search of a Seamaster 300. As there are many sites that cover all aspects of a SM300 such as new builds, fakes and bracelet adjustment etc. in some depth I have not included these topics.
I am certainly not an expert so am unable to verify that all the information contained is 100% correct. Given that some of the these watches are almost 50 years old it is very difficult for any guide of his type to be totally accurate.
I welcome your views and comments especially if you have further information or believe there are inaccuracies. But please don't shoot the messenger!
Wherever possible the copyright for the pics has been acknowledged.
PIC.1 - Copyright: Amanico, The PuristS (PuristSPro.com)
http://i1017.photobucket.com/albums/...iew/RV_001.jpg
Although the Omega Vintage website states the SM300 was in their International Collection from 1962 - 1969 it probably did not reach the dealers until 1964. It was available either with a metal bracelet or leather strap.
Initially the SM300 was available as non date watch with a centre sweep second hand. The majority of non US watches used an Omega cal.552 movement with 24 jewels created in 1958. The Omega cal.550 movement with 17 jewels created in 1960 was chosen specifically for the American market, as watches that exceeded 17 jewels were subject to more tax in the US. The compromise was made in the automatic assembly, where brass bushes were used instead of jewels. The brass bushes were prone to wear, and it is not uncommon to see cal.550 movements that have had both the upper and lower automatic bridges changed to the jewelled version.
The date version was introduced in 1967 as case ref.166.024 and used an Omega cal.565 movement with 24 jewels created in 1965.
The SM300 name suggests it to be waterproof to 300 metres but the Omega Vintage website and period catalogues list it as waterproof to 600 feet or 200 meters.
PIC.2 -Copyright: old-omegas.com
http://i1017.photobucket.com/albums/...iew/600_01.jpg
PIC.3 - Copyright: old-omegas.com
http://i1017.photobucket.com/albums/...iew/600_02.jpg
Ω Cases.
The bezel is 40mm in diameter on a 42mm case excluding the crown.
The case 13mm thick including the height of the domed crystal.
Lug to lug it is 47.5mm with a strap width of 20mm between the lugs.
PIC.4 - Cross section of the case.
http://i1017.photobucket.com/albums/...g?t=1289668983
Although the vintage cases have the same thickness as the current service replacement cases they appear thinner due to the shape of the lug ends.
PIC.5 http://i1017.photobucket.com/albums/...g?t=1289683518
After studying the logos inside SM300 cases it appears that Huguenin Frères (logo on left) produced the early cases and then Centrale Boîtes S.A., (centre logo) produced most of the rest. However some of the later cases were produced by other companies including Piquerez (logo on right).
http://i1017.photobucket.com/albums/...Poincon_HF.jpg http://i1017.photobucket.com/albums/...Poincon_CB.jpg http://www.boucher.cc/Watches/Watchp...e/Piquerez.jpg
It is thought that Huguenin Frères originally designed the lyre lug shaped case. Shown below is a project by Huguenin Frères for a Speedmaster case with bi directional bezel that was rejected by Omega.
PIC.6
http://i1017.photobucket.com/albums/...w/3409_1_b.jpg
With the exception of the crown which changed late '67 early '68 the case shape and dimensions did not change during production. However there are sometimes slight differences in the profiles especially between the different manufactures. A variation in the rehault which surrounds the outer dial has also been noted. The majority of the rehaults are highly polished steel as seen in Pic.21 but some SM300s have a dark coloured rehault with a matt finish as seen is Pic.23 and Pic.24
Re: The Omega Seamaster 300 including Military watches
Pic.7 shows the inside of a 1963 Huguenin Frères case back which is the earliest case I have been able to find online.
Pic.8 shows the inside of a 1964 Huguenin Frères case back.
PIC.7 - Copyright: Laurentb Chronomania (Chronomania.com)
http://i1017.photobucket.com/albums/...g?t=1289839878
PIC.8 - Copyright: Thierry7461, Chronomania (Chronomania.com)
http://i1017.photobucket.com/albums/...461_chro_2.jpg
At the top and enclosed in a triangle is the Omega logo Ω and the wording OMEGA WATCH Co - the last 'o' in WATCH Co is always smaller in size than the rest of the type. Copy below the triangle reads FAB. SUISSE and SWISS MADE.
ACIER STAYBRITE is the trade name for steel used by by Huguenin Frères. The Staybrite brand was created in 1954and belonged to Firth Stahl Verkaufs SA company a company owned by Firth Brown Group. It was subsequently purchased by British Steel who sold the business in 1979 to F.W. Hempel & Co the current owner of the mark.
Staybrite 1.4301 steel used by the watch industry at the time was composed of 18% chromium and 12% nickel, which is close to 316 L steel (16-18% chromium and 10,5-13% nickel) the industry standard at the time.
Below the case manufacturer's HF logo follows the case reference and in the case backs illustrated above a dash and then the year of production. The year of production does not appear in all case backs.
The first three numbers of the case ref 165.024 comes from the following Omega table.
1 figure |
2nd digit |
3rd digit |
| 1 - Gent's watch |
1 - Manual winding without seconds |
1 - Non water-resistant |
| 2 - Gent's jewellery watch |
2 - Manual winding small seconds |
2 - Non water-resistant date |
| 3 - Gent's bracelet watch |
3 - Manual winding centre seconds |
3 - Non water-resistant chronometer |
| 4 - Gent's jewellery bracelet watch |
4 - Manual winding chronograph |
4 - Non water-resistant chronometer date |
| 5 - Lady's watch |
5 - Automatic winding without seconds |
5 - Water-resistant |
| 6 - Lady's jewellery watch |
6 - Automatic winding centre seconds |
6 - Water-resistant date |
| 7 - Lady's bracelet watch |
7 - Automatic winding chronograph |
7 - Water-resistant chronometer |
| 8 - Lady's jewellery bracelet watch |
8 - Electronic chronograph |
8 - Water-resistant chronometer date |
|
9 - Electronic |
|
1 = Gent's watch. 6 = Automatic winding centre seconds. 5 = Water-resistant. The 024 is the model number for the SM300.
The date version is numbered 166.024.
Although there have been many theories regarding the reference S.C. it is probably just an abbreviation of Steel Case. As can be seen in the 1966 case in Pic.9 the S.C. no longer appears. Note also that the case ref.165024 does not have a full point in the middle.
PIC. 9
http://i.ebayimg.com/00/s/NzI0WDc1OQ...De2Q~~60_3.JPG
Pic.10 shows the inside a 1968 Centrale Boîtes S.A. case back. INOXYDABLE, which means stainless, has now replaced the word STAYBRITE. This indicates a change in the steel supplier for the cases. There is now a full point separating 165.024.
PIC.10
PIC.11
http://i1017.photobucket.com/albums/...w/IMG_0406.jpg
Pic.12 illustrates that the very early cases had a slightly different profile around the outer edge and case opening slots.
PIC.12
http://www.photos-encheres.com/store/72/231/09.jpg
Ω Crowns.
The Naiad non screw crown (1962 to late '67 or early '68) is 3.15mm deep and 6.7mm in diameter with 24 grooves.
The screw down crown (late '67 or early '68 to end of production) is 5mm deep and 6.2mm in diameter with 22 grooves.
The Military issue SM300 was introduced in 1967 and part of the specification for the Military watch was a screw down crown. The change of crown for non-military watches probably came about as a result of this so that the production of only one type of case was required.
PIC.13http://i1017.photobucket.com/albums/..._Review/C3.jpg
Left Pic: Top is screw crown with Naiad below. Right Pic: Left is screw crown with Naiad on the right.
Ω Crystals.
Omega describe the crystal as 'domed triple layer Hesalite'. My understanding is that Hesalite is Polymethyl Methacrylate (plexiglas). The domed crystal stands proud of the bezel by about 3mm and is engraved in the centre with the Omega Ω logo.
Ω Serial numbers.
PIC.14
Each Omega movement has its own unique 8 digit serial number and the table below correlates numbers with date of production. Although the table is not 100% accurate it is a pretty good guide. Only the years of production of the 165(6).024 are listed.
Re: The Omega Seamaster 300 including Military watches
The earliest SM300 serial number for a 165.024 I am aware of is 20'308'515.
1963 - 20'000'000 1964 - 21'000'000 1965 - 22'000'000 1966 - 23'000'000 1966 - 24'000'000
1967 - 25'000'000 1968 - 26'000'000 1968 - 27'000'000 1969 - 28'000'000 1969 - 29'000'000
1969 - 30'000'000 1969 - 31'000'000 1970 - 32'000'000
Ω Dials.
Fake dials abound for the SM300 and as this topic has been covered on many sites I am not addressing this issue within this guide.
Pic.15 illustrates the first dial style issued in 1963.
PIC.15 http://i1017.photobucket.com/albums/...0/IMG_0336.jpg
In the early 1960s the use of Radium on watch dials had been banned and Swiss dial makers took to marking their dials as T SWISS MADE T to show the dial contained no Radium. The 'T' stood for Tritium the new luminous material that replaced Radium. Some early SM300 dials were produced before marking a dial with a 'T' was made compulsory and are marked SWISS MADE only. Although these dials are rare they are original and the SWISS MADE only marking can be seen in some early catalogues. All dials had painted luminous hour markers.
PIC.16
http://i1017.photobucket.com/albums/...iew/SWISSM.jpg
Copyright: Laurentb, Chronomania
(Chronomania.com)
Pic.17 shows the dial version introduced in 1967 that has become known as the 'Big triangle'. This is usually fitted with sword hands.
PIC.17 - Copyright: Neil Worboys.http://i419.photobucket.com/albums/p...s/P1050363.jpg
Ω Hand sets.
Most SM300s had either luminous steel baton hands (Pic.18) or the later larger luminous steel sword hands (Pic.21) both with a luminous tipped white centre seconds hand similar to the Speedmaster. But there is third variation. Pic.19 shows a very early SM300 which has the broad arrow hand set used on the previous model CK14755. Pic.20 shows an illustration of this combination in a 1964 Italian Omega catalogue. A posting in 2009 by the owner of one of these watches explained that despite a lot of research he was unable to find out any more information. The 'Extract from the Records' that he received from Omega in 2006 stated that the watch was manufactured in March 1964 and sold in Italy which ties in with the catalogue date. Other than my own example and the one featured in the 2009 posting I have not been able to find any more pictures of an SM300 with this configuration.
PIC.18
http://www.photos-encheres.com/store/72/231/04.JPG
PIC.19 - Copyright: Neil Worboys.http://i419.photobucket.com/albums/p...s/P1040769.jpg
PIC.20 - 1964 Italian Omega catalogue.
http://forums.watchuseek.com/attachm...mega-12-64.jpg
PIC.21 - Copyright: Neil Worboys.http://i419.photobucket.com/albums/p...s/P1050165.jpg
Re: The Omega Seamaster 300 including Military watches
Ω Bezel and inserts.
The bezel is 60 click and bidirectional. During the production of the SM300 bezel inserts there were a number of changes to the type style and size of the numbers. As the current style bezel, in use at the time, would have been fitted as a service replacement many early examples have later bezels. A later watch with an early bezel usually means the bezel has been replaced too.
It is not possible to be 100% exact with the production dates for different bezel styles so dates indicated below are approximate.
Current service replacement bezel, dials and hand sets will be Luminova rather than Tritrium and have a different glow as illustrated below.
PIC.22
http://i1017.photobucket.com/albums/...iew/L_vs_T.jpg
PIC.23 - 1963 - light condensed font - rounded top '3' - pointed top '4' - angled serif on '1'.
http://i214.photobucket.com/albums/c...GA/15cnb5y.jpg
Copyright: Lawrence B, Chronomania (Chronomania.com)
PIC.24 - 1964 - bold condensed font - rounded top '3' - flat top '4' - horizontal serif on '1'.
http://i214.photobucket.com/albums/c...fev2010957.jpg
Copyright: Amanico, The PuristS (PuristSPro.com)
PIC.25 - 1964 - extra bold font - flatter top '3' - flat top '4' - angled serif on '1'.
http://i.ebayimg.com/t/VINTAGE-OMEGA...C%21~~60_3.JPG
PIC.26 - 1964 - medium font - flat top '3' - pointed top '4' - no serif on '1'. No Tritium on 5 minute markers.
http://i1017.photobucket.com/albums/...79737788-1.jpg
PIC.27 - 1969 - medium font - rounded top '3' - flat top '4' - angled serif on '1'. Copyright: Neil Worboys.
http://i419.photobucket.com/albums/p...s/P1050190.jpg
Re: The Omega Seamaster 300 including Military watches
Ω Military models.
In 1966 the British Ministry of defence began negotiations with Omega to agree a specification for a diving watch to be used by the Military.
The final document was established on 1 January 1971, under reference DEF STAN 66 - 4 (Part 1). To collectors these documents are known as the 'standards MOD'.
MOD for Ministry Of Defence and shown below are a few extracts from the document.
http://i1017.photobucket.com/albums/...eview/MOD1.jpg
http://i1017.photobucket.com/albums/...eview/MOD2.jpg
http://i1017.photobucket.com/albums/...eview/MOD3.jpg
http://i1017.photobucket.com/albums/...eview/MOD4.jpg
http://i1017.photobucket.com/albums/...eview/MOD5.jpg
http://i1017.photobucket.com/albums/...eview/MOD6.jpg
http://i1017.photobucket.com/albums/...eview/MOD7.jpg
http://i1017.photobucket.com/albums/...eview/MOD8.jpg
For the complete document see: Ministry Of Defence Document 66-4 Part 1 / Issue 2
The first Military SM300s were introduced in 1967 with the standard dial and sword hands. I understand that a few used the Naiad crown but cannot see how that fitted in with the MOD specification.
All the military SM300 watches had engraved numbers on the case back, the letter 'T' for Tritium in a circle on the dial and solid non removable strap bars instead of the usual spring bar.
For further information on Military SM300s see: http://vintageomegaforum.com/documents/byguile/byguile.html.
PIC.28 - Copyright: Marcello Pisani, (mwrforum.net).
http://i1017.photobucket.com/albums/...forumnet_1.jpg
PIC.29 - Ignore middle watch. http://i1017.photobucket.com/albums/...forumnet_2.jpg
Copyright: Marcello Pisani, (mwrforum.net).
Re: The Omega Seamaster 300 including Military watches
Ω Bracelets.
This section is actually the one with the most variables as bracelets are removable. When an SM300 was purchased new the buyer had a choice of either a steel bracelet or leather strap. At any one time at least two different bracelets would have been in production and available plus the possibility of a discontinued NOS bracelet also still being in stock at the Omega AD. Then consider that the first owner may have chosen a leather but later he or the next owner changed to a bracelet. Finally bracelets would have become worn and damaged and then changed to another or the clasp replaced.
For the sake of this guide I'm going with three bracelet types were available during the SM300 production run.
1506 - 1964-1966 - with end parts No. 16.
1035 - 1966-1972 - with end parts No. 516.
1039 - 1968-1971 - with end parts No. 516.
Just to confuse things further Pic.34 shows a clasp marked 1501 and 1035.
These original stainless steel bracelets have two sets of expandable spring links joined to non stretch links - one set each side of the clasp. The links are flat with the outer links as polished steel and the inner links brushed.
Pic.31 illustrates the 1506 clasp showing the Omega logo extending past the edge of the outer clasp. Pic.32 illustrates the outer clasps for both the 1035 and 1039 bracelets which were identical with the numbering on the inner clasp giving the bracelet its identity.
The inner clasps on these bracelets have a date code ie. Pic.34 has 4 over 66 for the fourth quarter of 1966 and Pic.35 has 3 over 1971 for the third quarter of 1971.
I have been unable to find original period pics for the leather strap or the Omega buckle(s) available during the SM300 production run.
PIC.30
http://i.ebayimg.com/00/s/MTA5NlgxNj...zkyQ~~60_3.JPG
PIC.31 http://i1017.photobucket.com/albums/...w/IMG_0349.jpg
PIC.36
Well guys that's the end of my 'Quick Guide to an Omega SM300' and I hope you have found it helpful.
Please add any further information that would be useful - especially early serial numbers and pics of an original Omega leather strap and buckle.
Post je preuzet s forma TZ-UK!
Uživajte u super opisu,mislim da i nije potrebno prevoditi tekst uz ovako dobre slike.
Re: The Omega Seamaster 300 including Military watches
svdja mi se sve sto je u temi ...bas lepo
