Re: Milan Zmaj - moji satovi
Svi koji su koristilu u to vreme cal 11,godina kao sto se i vidi 1969 i da ne bese El primera bio bi medju prvim koji su odradili odlican posao.
http://www.ranfft.de/bidfun/katb/2uswk/Hamilton_11.jpg
Fig. 1
|
Breitling 11 Chronomatic (Buren 1281)
Features
automatic chronograph, 60s, 30min, 12h, cam switched
date: set by changing 21-24h
Data
13.75''', Dm= 31.0mm
H= 7.7mm
17 jewels
f = 19800 A/h
power reserve 42h
Balance staff U3426
Stem W3398
Main spring / battery
1.60 x 10.5 x 0.105mm |
Remarks
1969-
joint development of Hamilton-Buren, Breitling and Heuer
module Dubois-Depraz 8510 on Buren 1281
crown at 9h
micro rotor
double excenter regulator for curb pins and stud carrier
family:
11: 19800 A/h
12: 21600 A/h
14: as 12, with 24h-GMT
15: sub second instead of 12h-counter
Example, year: signature; shock device
1969: Hamilton, Swiss, 17 Jewels; Incabloc
(Hamilton 11) |
http://www.ranfft.de/bidfun/katb/2uswk/Buren_15.jpg
Fig. 1
|
Buren 15 Chronomatic (Buren 1281)
Features
automatic chronograph, 60s, 30min, cam switched
sub second at 10h
date: set by changing 21-24h
Data
13.75''', Dm= 31mm
H= 7.7mm
17 jewels
f = 21600 A/h
power reserve 42h
Balance staff U3426
Stem W3398
Main spring / battery
1.60 x 10.5 x 0.105mm |
Remarks
1969-
joint development of Hamilton-Buren, Breitling and Heuer
module Dubois-Depraz 8510 on Buren 1281
crown at 9h
micro rotor
family:
11: 19800 A/h
12: 21600 A/h
14: as 12, with 24h-GMT
15: sub second instead of 12h-counter
Example, year: signature; shock device
ca. 1975: JRGK (Kelek), Swiss, 17 Jewels; Incabloc |
http://www.ranfft.de/bidfun/katb/2uswk/Hamilton_11.jpg
Fig. 1
|
Hamilton 11 Chronomatic (Buren 1281)
Features
automatic chronograph, 60s, 30min, 12h, cam switched
date: set by changing 21-24h
Data
13.75''', Dm= 31mm
H= 7.7mm
17 jewels
f = 19800 A/h
power reserve 42h
Balance staff U3426
Stem W3398
Main spring / battery
1.60 x 10.5 x 0.105mm |
Remarks
1969-
joint development of Hamilton-Buren, Breitling and Heuer
module Dubois-Depraz 8510 on Buren 1281
crown at 9h
micro rotor
double excenter regulator for curb pins and stud carrier
family:
11: 19800 A/h
12: 21600 A/h
14: as 12, with 24h-GMT
15: sub second instead of 12h-counter |
http://www.ranfft.de/bidfun/katb/2uswk/Heuer_12.jpg
Fig. 1
|
Heuer 11 Chronomatic (Buren 1281)
Features
automatic chronograph, 60s, 30min, 12h, cam switched
date: set by changing 21-24h
Data
13.75''', Dm= 31mm
H= 7.7mm
17 jewels
f = 19800 A/h
power reserve 42h
Balance staff U3426
Stem W3398
Main spring / battery
1.60 x 10.5 x 0.105mm |
Remarks
1969-
joint development of Hamilton-Buren, Breitling and Heuer
module Dubois-Depraz 8510 on Buren 1281
crown at 9h
micro rotor
double excenter regulator for curb pins and stud carrier
family:
11: 19800 A/h
12: 21600 A/h
14: as 12, with 24h-GMT
15: sub second instead of 12h-counter
Example, year: signature; shock device
1969: Heuer Cal.12, Swiss, 17 Jewels; Incabloc
(Heuer 12) |
http://www.ranfft.de/bidfun/katb/2uswk/Dugena_3207.jpg
Fig. 1
|
Dugena 3207 (Buren 11)
Features
automatic chronograph, 60s, 30min, 12h, cam switched
date: set by changing 21-24h
Data
13.75''', Dm= 31mm
H= 7.7mm
17 jewels
f = 19800 A/h
power reserve 42h
Balance staff U3426
Stem W3398
Main spring / battery
1.60 x 10.5 x 0.105mm |
Remarks
1969-
joint development of Hamilton-Buren, Breitling and Heuer
module Dubois-Depraz 8510 on Buren 1281
crown at 9h
micro rotor
double excenter regulator for curb pins and stud carrier
Example, year: signature; shock device
ca. 1970: Dugena, Swiss; Incabloc |
Re: Milan Zmaj - moji satovi
Hvala Zmaju!:)
Bilo je posla, ali na obostrano zadovoljstvo , problem resen :thumbsup:, da bi dosao do dela sa rotorom , morao sam gornji chrono mehanizam da rasturim, chrono je bio potpuno rastelovan, na njemu postoje srafovi za stelovanje naleganja zupcanika a i opruge su ispale iz lezista...
Sam mehanizam sata je bio pun sitne prljavstine koja je zaglavila isti... da bi se ocistio kako treba sve je trebalo skinuti ukljucujuci i cifer i kazaljke.
Prilikom skidanja kazaljki trebalo je voditi racuna da se boja neosteti , a prilikom vracanja kazaljka mora da stoji na nuli kao nisan na pusci...
Drukeri su novi 4.5mm na sraf, naruceni iz NL, staklo ispolirano , kao i kuciste , bezel koji je zapekao ponovo se rotira i ubacen fosfor na nulu.
Naravno posle sastavljanja sledi stelovanje balansa i chronografa , a zatim test , posto kada uradim sat obavezno ga nosim par dana da vidim kako se ponasa.
Kad polozi test spreman je za ponosnog vlasnika.:thumbup:
Re: Milan Zmaj - moji satovi
Ok, hvala.
Kazu da se 30-50% sporije navije do kraja, pa sam zbog toga i pitao.
Re: Milan Zmaj - moji satovi
Bre, osim sto si Dr. mogu odsad da te zovem i Iggy-san, montiras te kazaljke i testiras ko da radis u Morioki za Grand Seiko :D
Re: Milan Zmaj - moji satovi
Citat:
Rus_PA kaže:
Ok, hvala.
Kazu da se 30-50% sporije navije do kraja, pa sam zbog toga i pitao.
Oko toga se vode debate, ali ja mislim da se za nijansu sporije navijaju mehanizmi sa mikro-rotorom. Mikro rotor daje mehanizmu mogucnost vece rezerve snage i moze se koristiti bolje u tanjim mehanizmima, takodje micro rotor je navodno bolji za mehanizme sa vise komplikacija (doduse i obicni centralni rotori se prave tako da nema smetnji za komplikacije).....
Re: Milan Zmaj - moji satovi
Citat:
Rus_PA kaže:
Ok, hvala.
Kazu da se 30-50% sporije navije do kraja, pa sam zbog toga i pitao.
I ja cu da se nadovezem na ovo pitanje. Citao sam puno o tome, ali sam imao prilike da pricam i sa casovnicarima koji znaju i koji su radili takve mehanizme. Evo njihovog odgovora: Sve zavisi ciji je mehanizam sa mikro rotorom, neki od njih se navijaju i bolje od ovih sa obicnim rotorom.
Re: Milan Zmaj - moji satovi
Citat:
anbeast kaže:
Bre, osim sto si Dr. mogu odsad da te zovem i Iggy-san, montiras te kazaljke i testiras ko da radis u Morioki za Grand Seiko :D
Samo je bitno da ga ne zoves Toranaga-san. Podseti me sada Soguna :)
Re: Milan Zmaj - moji satovi
Re: Milan Zmaj - moji satovi
...odma prekid chat-a , nema zezanja ! Heheheheeeeeeee :laugh:
